🔒 Your files stay on your device — core audio processing runs locally. Privacy details →
Find a toolCtrl K
📢
Free · In-browser · No upload

Volume Booster.

Make quiet audio louder with up to +36 dB of gain, optional soft clipping or saturation, and a dynamics stage for peak control. Use the live waveform and meters to preview before export.

Before-and-after illustration of Volume Booster: Quiet audio becomes Louder render through Boost with protection.
Before → process → afterSee the signal story, then hear it in the workspace.

DYNAMICS MAP

Loudness Gain Path

Follow the level decision, not just the waveform. The important story is how the detector reacts, where gain starts moving and whether the result stays controlled without flattening the performance.

Before-and-after illustration of Volume Booster: Quiet audio becomes Louder render through Boost with protection.
Quiet audioBoost with protectionLouder render
A threshold-led gain path: peaks cross the decision line, the processor responds, and the output envelope becomes more deliberate.
Open the full signal breakdownBest source, processing logic, limits and three-pass listening check
  1. Quiet audio

    Start with the right material

    Making a low-level voice note, demo or reference track easier to hear.

  2. Boost with protection

    Understand the transformation

    Gain feeds a waveshaper and an optional DynamicsCompressor-based limiting stage.

  3. Louder render

    Verify the usable result

    A louder local render using the gain and protection settings selected in the interface.

Peak safety

Where this workflow stops

Extra gain also raises noise and existing distortion. The protection stage is not a certified true-peak limiter, so aggressive settings can still sound clipped or crushed.

THREE-PASS CHECK

Make the final decision by ear

  • Compare at matched loudness so “louder” is not mistaken for “better”.
  • Inspect the loudest transient and the quietest useful detail.
  • Leave enough headroom for the next processing or delivery stage.

How to boost the volume of an audio file

  1. Drop your file into the upload box — the tool measures and shows its current peak level.
  2. Pick a preset or set the gain manually up to +36 dB; start low and compare the loudest section.
  3. Press Apply effect; the result shows input and output peaks so you can see the change.
  4. Preview the louder version, then download it as MP3 or WAV.

This volume booster helps with recordings captured too quietly: voice memos, lectures, distant interviews or files that play softer than the rest of a library. Gain can feed an optional waveshaper and Web Audio dynamics processor to reduce high sample peaks. This is not a certified true-peak or guaranteed brick-wall limiter, so aggressive settings can still pump, flatten transients or create distortion. Preview the loudest passage and back off when needed. Processing stays local.

For boosting only the low end rather than the whole signal, use Bass Boost; for reshaping tone band by band, the 10-band Audio EQ is the right tool. If background hiss gets loud along with the voice, run the file through the Noise Remover first.

Volume Booster: quick answer and technical limits

Quick answer: A gain tool that raises quiet audio and can add soft saturation plus dynamics control when peaks get dense.

Best for
Making a low-level voice note, demo or reference track easier to hear.
How it works
Gain feeds a waveshaper and an optional DynamicsCompressor-based limiting stage.
What you get
A louder local render using the gain and protection settings selected in the interface.

Know before you use it: Extra gain also raises noise and existing distortion. The protection stage is not a certified true-peak limiter, so aggressive settings can still sound clipped or crushed.

Privacy: Selected audio is processed in this browser and is not uploaded to AudioWrench. Normal page assets can still be requested as described in the privacy notice. Privacy details →

FAQ

How do I make a quiet audio file louder while controlling distortion?
Load the file, pick a preset or set gain up to +36 dB, then preview the loudest section. The optional waveshaper and Web Audio dynamics processor can reduce harsh sample peaks, but they are not certified true-peak limiting and heavy gain can still sound compressed or distorted.
How much louder can this volume booster make my file?
Up to +36 dB of gain. That is an extreme range: the harder the signal drives the waveshaper or dynamics stage, the more it can flatten transients, pump or add audible distortion. Start with a small boost and compare at matched listening volume.
Can I see how loud my file actually is?
Yes. When you load a file the tool measures and displays its peak level in dBFS, and after boosting it shows the input and output peaks side by side, so you can verify exactly how much headroom was used.
Is the volume booster free, and are my recordings private?
Free with no signup or watermark. The gain and limiter run on your device via the Web Audio API, and the selected recording is not uploaded to AudioWrench. Normal page assets can still be requested as described in the privacy notice. You download the boosted file as a 320 kbps MP3 or WAV.